NordicTrack T 6.7c Treadmill Enc Manual - Page 12

Upright Wire 81.

Page 12 highlights

6. If there are four screws (E) preattached inside the Handrails (84), remove and discard the 6 28 screws. Attach a Handrail (84) to the Right Upright (90) with two 5/16" x 3" Screws (28) and two 5/16" Star Washers (11); start both Screws, and then tighten them. Make sure not to pinch the Upright Wire (81). 11 E 81 84 Attach the other Handrail (not shown) to the Left Upright (not shown) in the same way. Note: There are no wires on the left side. 90 7. Set the Console Base (64) face down on a soft surface to avoid scratching the Console Base. 7 Remove and discard the two indicated screws (F). Then, remove the Pulse Crossbar (31). 64 F 31 F 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

12
6.
If there are four screws (E) preattached inside
the Handrails (84), remove and discard the
screws.
Attach a Handrail (84) to the Right Upright (90)
with two 5/16" x 3" Screws (28) and two 5/16"
Star Washers (11);
start both Screws, and
then tighten them. Make sure not to pinch the
Upright Wire (81).
Attach the other Handrail (not shown) to the
Left Upright (not shown) in the same way.
Note: There are no wires on the left side.
11
81
84
28
6
90
64
31
F
F
7
7.
Set the Console Base (64) face down on a soft
surface to avoid scratching the Console Base.
Remove and discard the two indicated screws
(F). Then, remove the Pulse Crossbar (31).
E