NordicTrack T23.0 Instruction Manual - Page 36
UNPLUG THE POWER, if the walking belt has
View all NordicTrack T23.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
SYMPTOM: The walking belt is not centered between the foot rails IMPORTANT: If the walking belt rubs against the foot rails, the walking belt may become damaged. a. First, remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centered. SYMPTOM: The walking belt slips when walked on a. First, remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened. a a Foot Rails 36