NordicTrack U60 Uk Manual - Page 17
HOW TO USE AN ONBOARD WORKOUT, IMPORTANT: When the current segment of
View all NordicTrack U60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
HOW TO USE AN ONBOARD WORKOUT 1. Begin pedaling or press any button on the console to turn on the console. the next segment, the resistance level and/or target speed will appear in the display for a few seconds to alert you. The resistance of the pedals will then change. When you turn on the console, the display will turn on. The console will then be ready for use. 2. Select an onboard workout. To select an onboard workout, press the Calorie Workouts button or the Performance Workouts button repeatedly until the desired workout appears in the display. When you select an onboard workout, the display will show the duration of the workout and the name of the workout. A profile of the speed settings of the workout will appear in the matrix. As you exercise, you will be prompted to keep your pedaling speed near the target speed for the current segment. When an upward-pointing arrow appears in the display, increase your pedaling speed. When a downward-pointing arrow appears, decrease your pedaling speed. When no arrow appears, maintain your current pedaling speed. IMPORTANT: The target speed is intended only to provide motivation. Your actual pedaling speed may be slower than the target speed. Make sure to pedal at a speed that is comfortable for you. The maximum resistance level and the maximum speed for the workout will also appear in the display. 3. Begin pedaling to start the workout. Each workout is divided into one-minute segments. One resistance level and one target speed is programmed for each segment. Note: The same resistance level and/or target speed may be programmed for consecutive segments. During the work- out, the profile on the speed tab will show your progress. Profile The flash- ing segment of the profile represents the current segment of the workout. The height of the flashing segment indicates the target speed for the current segment. At the end of each segment of the workout, a series of tones will sound and the next segment of the profile will begin to flash. If a different resistance level and/or target speed is programmed for If the resistance level for the current segment is too high or too low, you can manually override the setting by pressing the Resistance buttons. IMPORTANT: When the current segment of the workout ends, the pedals will automatically adjust to the resistance level programmed for the next segment. The workout will continue in this way until the last segment ends. To stop the workout at any time, stop pedaling. The time will flash in the display. To resume the workout, simply resume pedaling. 4. Follow your progress with the display. See step 4 on page 14. 5. Measure your heart rate if desired. See step 5 on page 15. 6. Turn on the fan if desired. See step 6 on page 16. 7. When you are finished exercising, the console will turn off automatically. See step 7 on page 16. 17