NordicTrack U60 Uk Manual - Page 8
Attach the Accessory Tray 8 to the Upright 4, Bolts 70 and two M8 Locknuts 43
 |
View all NordicTrack U60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. Attach the Accessory Tray (8) to the Upright (4) with an M6 x 50mm Screw (89). 5 89 8 4 6. Have a second person hold the Handlebar (5) near the Upright (4). 6 See the inset drawing. Route the Upper Wire (87) through the Pivot Post (78) and the Pivot Bracket (71) as shown. Tip: Avoid pinching the wires. Insert the Pivot Post (78) into the Upright (4). 5 87 71 Attach the Pivot Post (78) with two M8 x 50mm Bolts (70) and two M8 Locknuts (43); make sure that the Locknuts are in the hexagonal holes. Avoid pinching the wires 78 43 70 4 Hexagonal Holes 87 71 78 8
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
8
5
8
4
89
5.
Attach the Accessory Tray (8) to the Upright (4)
with an M6 x 50mm Screw (89).
6
6.
Have a second person hold the Handlebar (5)
near the Upright (4).
See the inset drawing.
Route the Upper Wire
(87) through the Pivot Post (78) and the Pivot
Bracket (71) as shown.
Tip: Avoid pinching the wires.
Insert the Pivot
Post (78) into the Upright (4).
Attach the Pivot Post (78) with two M8 x 50mm
Bolts (70) and two M8 Locknuts (43);
make sure
that the Locknuts are in the hexagonal holes.
4
71
43
70
78
87
87
71
78
5
Hexagonal
Holes
Avoid pinching
the wires