NordicTrack Vertex 670 English Manual - Page 7
Slide the Top Weight 16 onto the Weight Guides
View all NordicTrack Vertex 670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Place two Weight Bumpers (19) over the indicat- 3 ed holes in the Stabilizer (5). Insert the two Weight Guides (23) into the Weight Bumpers and the Stabilizer. Attach the indicated Weight Guide (23) to the Stabilizer (5) with a 3/8" x 2 1/2" Bolt (54), two 5/8" x 1/2" Bushings (42), two 3/8" Washers (55), and a 3/8" Nylon Jamnut (63). 23 55 63 42 19 5 42 4. Open the parts bag labeled "Weight Inserts." See the inset drawing. Press two Weight Inserts (77) into the indicated holes in each Weight (26). Make sure the large pin groove is oriented as shown. Slide all nineteen Weights (26) onto the Weight Guides (23). Make sure the Weights are oriented correctly; the pin grooves must be on the side shown. Press the Weight Tube Bumper (47) into the bottom of the Weight Tube (36). Slide the Top Weight (16) onto the Weight Guides (23). Insert the Weight Tube (36) into the Weights (26). 4 23 16 36 47 55 54 77 26 26 Pin Grooves Large Pin Groove 7