NordicTrack Vgr900 Elliptical English Manual - Page 5
Assembly
![]() |
View all NordicTrack Vgr900 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY Assembly requires two people. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the two included allen wrenches, assembly requires a phillips screwdriver , an adjustable wrench , a rubber mallet , and pliers . As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-attached for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled. M8 Split M10 Nylon Locknut (26)Ð7 Washer (58)Ð2 M8 Washer (33)Ð2 Front Stabilizer Bolt (86)Ð2 Chrome Tube Washer (84)Ð2 Plastic Pedal Spacer (92)Ð2 M10 x 85mm Bolt (25)Ð1 Rear Stabilizer Bolt (60)Ð2 Pedal Screw (43)Ð6 Incline Axle Screw (30)Ð2 1. Identify the Rear Stabilizer (94), which has Wheels (45) attached to it. 1 Attach the Rear Stabilizer (94) to the rear of the Frame (1) with the two Rear Stabilizer Bolts (60) and two M10 Nylon Locknuts (26). Make sure that the Rear Stabilizer is turned so the Wheels are not touching 26 the floor. 1 26 94 45 2. Attach the Front Stabilizer (90) to the front of the Frame (1) with the two Front Stabilizer Bolts (86) and 2 two M10 Nylon Locknuts (26). 86 90 26 60 26 1 5
![](/manual_guide/products/nordictrack-vgr-900-english-manual-708ed4d/5.png)