Oki B4250 Guide: User's, B4100, B4250, B4350, B4350n (American English) - Page 40
Paper feed, size and media setting, B4100, B4250, CAUTION
View all Oki B4250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
PAPER FEED, SIZE AND MEDIA SETTING The process used to fuse (fix) the printed image to the paper involves a mixture of pressure and heat. Too much heat will cause lightweight paper to crease or curl, and corrugations in transparencies. Too little heat will cause the image not to fuse fully into heavyweight paper. NOTE Although media properties can be set in the printer driver for particular jobs, when filling a tray with media it is recommended that you manually set the printer to match the media as described here. B4100, B4250 The print quality for different types of paper is adjusted by changing the media type as follows: 1. Start the Status Monitor. 2. Click on [Printer Setup] tab - [Printer Menu] button - [Paper] tab. Click on the button for the paper tray being used. Adjust the media type to the required setting and, if necessary, the paper size to the size of the paper being used. 3. Click on the [Apply] button, [Close] button then [OK] button to set the printer to the new media type and printing quality. Printing transparencies When printing transparencies, the manual feed must be used and the media type changed to transparencies as follows: CAUTION! Damage to the printer may occur if the incorrect setting is used when printing transparencies. 1. Open the manual feed on the printer and place the transparency face up between the paper guides. 2. Adjust the paper guides to the width of the transparency. PAPER RECOMMENDATIONS > 40