Oki B6100 Configuration Guide: NIC Option - Page 15
LAT Configuration
View all Oki B6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Ethernet Network Interface Card Configuration Guide 2-7 NOTE: If no router is present on the network, the NIC will not accept AppleTalk print jobs for 60 seconds after booting. AppleTalk Host Troubleshooting Area to Check The printer is available to be selected in the Chooser Explanation Make sure the printer is in the right zone. LAT Configuration NOTE: The NIC needs an IP address before you can use EZWebCon. See "Setting the IP Address" on page 2-11. NOTE: Printing directly to a port is the easiest method for printing to the NIC. Printing Directly to a Port 1. $ RUN SYS$SYSTEM:LATCP LATCP> CREATE PORT LTAnnn/APPLICATION LATCP> SET PORT LTAnnn/NODE=PRQ_xxxxxx/PORT=Port_n LATCP> EXIT 2. $ INITIALIZE/QUEUE/START/ON=LTAnnn:/PROCESSOR=LATSYM /RETAIN=ERROR queue_name 3. NOTE: LAT terminal device characteristics may have to be changed to correctly print certain files. See your VMS documentation for more information. 4. $ PRINT/QUEUE=queue_name filename.txt