Oki B6300nSmartFormsSolutions B6200/6300 Series Setup Guide - English - Page 56
If Paper Jams
View all Oki B6300nSmartFormsSolutions manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
IF PAPER JAMS CAUTION! When removing jammed paper, make sure that no pieces of torn paper are left in the machine. A piece of paper remaining in the machine can cause a fire. If a sheet of paper is wrapped around the heat roller, or when clearing a jammed paper that is difficult or impossible to see, do not try to remove it by yourself. Doing so may cause injuries or burns. Switch off the machine immediately, and contact your Oki dealer. Guided by the message on the control panel, open the cover and remove the jammed paper. If paper is torn, check for any remaining torn pieces of paper. CAUTION! The fuser unit gets hot when operating. Avoid touching it. The covers and trays are identified in the following diagram: Cover A: When the optional offset catch tray is installed, fold the tray first before opening cover A. When a message to remove the drum-toner cartridge is displayed, refer to "Inside Cover A" on page 58. 56 > IF PAPER JAMS