Oki C130n C130n User's Guide (English) - Page 55
Thick Stock, DO NOT use thick stock that is, Capacity, Tray 1, Orientation, Driver, Media Type, Weight
View all Oki C130n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
" Dusty " Wet (or damp) Note Keep media between 15% and 85% relative humidity. Toner does not adhere well to moist or wet paper. " Layered " Adhesive " Folded, creased, curled, embossed, warped, or wrinkled " Perforated, three-hole punched, or torn " Too slick, too coarse, or too textured " Different in texture (roughness) on the front and back " Too thin or too thick " Stuck together with static electricity " Composed of foil or gilt; too luminous " Heat sensitive or cannot withstand the fusing temperature (180°C [356°F]) " Irregularly shaped (not rectangular or not cut at right angles) " Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons " Acidic " Any other media that is not approved Thick Stock Paper thicker than 90 g/m2 (24 lb bond) is referred to as thick stock. Test all thick stock to ensure acceptable performance and to ensure that the image does not shift. Capacity Tray 1 Up to 50 thick stock sheets, depending on their thickness Tray 2 Not supported Orientation Face up Driver Thick 1 (91 to163 g/m2) Media Type Thick 2 (164 to 209 g/m2) Weight 91 to 209 g/m² (25 to 55.9 lb) Duplexing Not supported DO NOT use thick stock that is " Mixed with any other media in Tray 1 (as this will cause printer misfeeding) 55 - C130n User's Guide