Oki C5100n OKI C5100 User's Guide - Page 151
Printer takes a long time to start printing., Toner rubs off when you rub the printed surface.
View all Oki C5100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Printer takes a long time to start printing. Possible cause Remedy The printer has to warm up returning from power save mode. In the printer menu settings, set power save to a higher value to increase the length of time before entering power save mode (SYS CONFIG MENU → POW SAVE TIME). The image drum carries Wait until this process has been completed. out a cleaning process to ensure print quality, which takes time. The fuser unit adjusts temperature, which takes time. Wait until this process has been completed. The printer is processing data from another interface. Wait until this data is processed. Toner rubs off when you rub the printed surface. Possible cause Remedy Media Weight and Set the value of media weight in the menu to Media Type settings the next heaviest one (MEDIA MENU → YYY may not be appropriate. MEDIA WEIGHT). Packing materials were left on the fuser when it was installed. Careful! Fuser my be HOT! Open the top cover and check to be sure that all the packing materials were removed from the fuser. To remove the fuser see "Changing the fuser unit" on page 355. C5100 Troubleshooting • 151