Oki C530dn C330/C530/C610/C711 DIMM Install Sheet - Page 18

the new one. To remove it, proceed as follows, otherwise skip to, board

Get Oki C530dn PDF manuals and user guides View all Oki C530dn manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

3. Turn locking screw (a) anti-clockwise and remove the inner access cover (b). Place it safely to one side. a b 4. Carefully remove the new memory board from its wrapping. Try to handle the board only by its short edges, avoiding contact with any metal parts as far as possible. In particular, avoid touching the edge connector. 5. Notice that the memory board has a small cutout in the edge connector, which is closer to one end than the other. 6. Identify the RAM expansion slot in the printer. 7. If the RAM expansion slot already contains a memory upgrade board, that board will have to be removed before you can install the new one. To remove it, proceed as follows, otherwise skip to step 8. (a) Release retaining clips and pull the board out of the slot. (b) Place the removed memory board in the antistatic bag which originally contained the new memory board. 8. Hold the new memory board by its short edges, so that the edge connector faces in towards the RAM expansion slot, and the small cutout is closer to the rear of the printer. C330/C530 Memory Install > 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
C330/C530 Memory Install > 18
3.
Turn locking screw (a) anti-clockwise and remove the inner access
cover (b). Place it safely to one side.
4.
Carefully remove the new memory board from its wrapping. Try to
handle the board only by its short edges, avoiding contact with
any metal parts as far as possible. In particular, avoid touching
the edge connector.
5.
Notice that the memory board has a small cutout in the edge
connector, which is closer to one end than the other.
6.
Identify the RAM expansion slot in the printer.
7.
If the RAM expansion slot already contains a memory upgrade
board, that board will have to be removed before you can install
the new one. To remove it, proceed as follows, otherwise skip to
step
8
.
(a)
Release retaining clips and pull the board out of the slot.
(b)
Place the removed memory board in the antistatic bag which
originally contained the new memory board.
8.
Hold the new memory board by its short edges, so that the edge
connector faces in towards the RAM expansion slot, and the small
cutout is closer to the rear of the printer.
b
a