Oki C530dn C330/C530/C610/C711 DIMM Install Sheet - Page 5

Enter, Menu down, Configuration, Reconnect the AC power cable and switch the printer on. - system board

Get Oki C530dn PDF manuals and user guides View all Oki C530dn manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

11. Gently push the board into the RAM expansion slot until it latches in and will not go any further. 12. Locate the retaining clips at the bottom of the side cover into their rectangular holes near the bottom of the printer. 13. Close the top of the side cover up to the printer and refit the securing screw loosened in step 4. 14. Close the front cover, and close the top cover, pressing down firmly at each side to latch it closed. 15. Reconnect the AC power cable and switch the printer on. 16. When the printer is ready, print a menu map as follows: (a) Press the Enter button. (b) Press the Menu down button then the Enter button to select the Print Information menu. (c) Select Configuration with the Enter button. (d) Press the Enter button once more to execute the Configuration menu. C610/C711 Memory Installation > 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
C610/C711 Memory Installation > 5
11.
Gently push the board into the RAM expansion slot until it latches
in and will not go any further.
12.
Locate the retaining clips at the bottom of the side cover into their
rectangular holes near the bottom of the printer.
13.
Close the top of the side cover up to the printer and refit the
securing screw loosened in step
4
.
14.
Close the front cover, and close the top cover, pressing down
firmly at each side to latch it closed.
15.
Reconnect the AC power cable and switch the printer on.
16.
When the printer is ready, print a menu map as follows:
(a)
Press the
Enter
button.
(b)
Press the
Menu down
button then the
Enter
button to
select the Print Information menu.
(c)
Select
Configuration
with the
Enter
button.
(d)
Press the
Enter
button once more to execute the
Configuration menu.