Oki C530dn C330/C530/C610/C711 DIMM Install Sheet - Page 4

5. Lift the edge of the side cover slightly and pull the cover away from the printer at the top. Lift the cover slightly to detach it from the printer. Place it safely to one side. a 6. Carefully remove the new memory board from its wrapping. Try to handle the board only by its short edges, avoiding contact with any metal parts as far as possible. In particular, avoid touching the edge connector. 7. Notice that the memory board has a small cutout in the edge connector, which is closer to one end than the other. 8. Identify the RAM expansion slot in the printer. 9. If the RAM expansion slot already contains a memory upgrade board, that board will have to be removed before you can install the new one. To remove it, proceed as follows, otherwise skip to step 10. (a) Release retaining clips and pull the board out of the slot. (b) Place the removed memory board in the antistatic bag which originally contained the new memory board. 10. Hold the new memory board by its short edges, so that the edge connector faces in towards the RAM expansion slot, and the small cutout is closer to the rear of the printer. C610/C711 Memory Installation > 4