Oki C7200 English: C7200 & C7400 Series Handy Reference - Page 14

Walk-Up Functions (cont.) Power Save Settings Power save sets how long the printer waits before going into standby mode. This saves energy, but when the printer is in standby mode it takes a few moments to warm up when it receives a print job or if you want to enter the printer menu and change settings. ! The default setting is 60 minutes. Other available settings include 5, 10, 15, 30 or 240 minutes; or you can turn power save off. Setting the Power Save Interval 1. Press MENU repeatedly until SYSTEM CONFIG MENU appears on the display. 2. Press ITEM (+ or -) until POWER SAVE DELAY TIME appears on the display. 3. Press VALUE (+ or -) repeatedly until the time interval you wish to select appears on the display. 4. Press SELECT to engage the new setting. 5. Press ON LINE to save the setting and exit the menu. Disabling/Enabling Power Save ! The default setting for Power Save is enabled. 1. Press MENU repeatedly until MAINTENANCE MENU appears on the display. 2. Press ITEM (+ or -) repeatedly until POWER SAVE appears on the display. 3. Press VALUE + to toggle the setting between ENABLE and DISABLE. 4. Press SELECT to engage the new setting. 5 Press ON LINE to save the setting and exit the menu. Print a Demo Page To print out a demo page: 1. Press MENU repeatedly until INFORMATION MENU appears on the display. 2. Press ITEM (+ or -) repeatedly until DEMO1 (the default demo page) or the file name you wish to print appears on the display. 3. Press SELECT. The demo page prints and the printer returns to the on-line state. 14