Oki C7300 Software Install Setup Guide - Page 4
Network Installation
 |
View all Oki C7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Network Installation Install the Ferrite Core Important! In order to reduce electromagnetic interference-"noise" that interferes with TVs or other appliances-you must put the enclosed ferrite core on the network cable connected to your printer. This is required by the FCC. Here's how to do it: □ Disconnect the network cable from the printer, if necessary. □ Loop the cable if necessary to keep the ferrite core in place. □ Place the open core about 1 inch from the cable connector on the printer end. □ Press the two halves of the core together until they click shut. 4
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
4
Important!
In order to reduce electromagnetic interference—”noise” that interferes with TVs or other appliances—you
must put the enclosed ferrite core on the network cable connected to your printer.
This is required by the FCC.
Here’s how to do it:
□
Disconnect the network cable from the printer, if necessary.
□
Loop the cable if necessary to keep the ferrite core
in place.
□
Place the open core about 1 inch from the cable connector on the printer end.
□
Press the two halves of the core together until they
click shut.
Network Installation
Install the Ferrite Core