Oki C9600n C9600 Network and Configuration Guide - Page 249
Boot Menu, Parallel Setup
View all Oki C9600n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
Printer Menu Boot Menu To access the Boot Menu: 1. Turn the printer off. 2. Press and hold the Enter key while turning the printer back on: be sure to continue holding the Enter key until "Initializing" appears on the display. Parallel Setup Item Value Description Parallel Enable Disable Enables/Disables the Centronics interface. Bi-Direction Enable Disable Enables/Disables the bi-directional Centronics interface. ECP Enable Disable Enables/Disables the ECP mode. Ack Width Narrow Medium Wide Sets the ACK width for compatible reception. Narrow = 0.5µs. Medium = 1.0µs. Wide = 3.0µs Ack/Busy Timing Ack in Busy Ack while Busy Sets order to output the BUSY and ACK signals for compatible reception. I-Prime 3 microseconds Sets the time to enable/disable the 50 microseconds I-PRIME signal. Disable Offline Receive Enable Disable When this is set to Enable, the interface keeps the receive-possible state even when you press the Off-line operating panel switch. The interface sends the BUSY signal only when the reception buffer is full or a service call occurs. PS only. 249