Oki C9600n C9600 Network and Configuration Guide - Page 92
Trap
View all Oki C9600n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Trap NOTE The default setting is underlined. Trap-1 Sets community name assigned to outgoing printer status traps such as off-line, paper out, etc. Up to 77 alphanumeric characters. Default is public. AdminManager [Setup] → [OKI Device Setup] → [SNMP] → [Printer Trap Setup ...] → [Printer Trap Community Name] Web Browser [Network] → [SNMP Trap] → [Printer Trap Settings] → {STEP1. Set Printer Trap Community Name} → [Printer Trap Community Name] TELNET [Setup printer trap] → [Prn-Trap community] Trap-2 Enable/disable sending a trap packet for each destination. Five IP address destinations and one IPX destination can be set up. AdminManager [Setup] → [OKI Device Setup] → [SNMP] → [Printer Trap Setup ...] → [TCP #!-5] → [Detail ...] → [Trap Enable] [Network] → [SNMP Trap] → [STEP3. Set Printer Trap Assignments] TELNET [Setup printer trap] → [Setup TCP#1-5 trap] → [TCP#1-5 Trap enable] Configuration: Configurable Items • 92