Oki GL412e GL408e/GL412e User's Guide - Page 118
DIAGNOSTICS MODE TABLE 4-15, DESCRIPTION, IGL EMULATION MODE TABLE 4-14, Print Darkness, Print Speed
View all Oki GL412e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
MENU IGL Setup Save state* MENU DIAGNOSTICS Unit 4: Printer Configuration IGL EMULATION MODE (TABLE 4-14) DESCRIPTION This menu saves the current state of the printer to flash memory. The pages, formats, and fields that currently exist in RAM memory save to flash memory and are restored at power up. This allows the format to be sent once and make it resident in the printer. Note: Saving the state does not save general printer settings for which configuration menus are provided. These settings are saved by storing the configuration, and selecting that configuration as the power up configuration. Examples of settings that can be configured this way by host control are print speed, print density, and media handling (continuous, tear-off, etc.). DIAGNOSTICS MODE (TABLE 4-15) DESCRIPTION Permits entry into the DIAGNOSTICS Mode. DIAGNOSTICS Priority Setting Printer Tests Test Count Software Build Hex Dump Mode Print Error Log Clear Error Log Flash Installed DRAM Installed Ptr On Time Printer Usage PrintHead Usage Head On Time Reset Head Data PrintHead Usage Head Type Head Voltage Priority Setting Command* Is the menu selection screen for the DIAGNOSTICS Mode. Allows the selection of which type of programming will take priority precedence in determining Print Darkness, Print Speed, and Print Offset. • Command - factory default. Any commands in the label job will take precedence and be used for printing. The LCD will reflect the new setting. • LCD - Any settings established through the printer's operator panel will be used for an incoming print job regardless of different command settings. GL408-412e Operator Manual 4-82 PN: 9001163A