Oki MICROLINE 186 Plus - Serial Users Guide - Page 65
General Problems/Solutions
View all Oki MICROLINE 186 Plus - Serial manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
General Problems/Solutions Problem 1 My word processor files do not print the way I have the menu and front panel set. Solution 1. Check your software application and/or printer driver settings: these override the menu and front panel settings (see Note above). 2. Before sending a file to the printer, many word processors send either an "initialization string" or an I-Prime signal to the printer. The initialization string contains codes that override the panel and menu settings. To change your printer to ignore the reset code, enter the Menu Mode, go to the Set-Up group and change the setting for Reset Inhibit to Yes. The I-Prime signal will automatically override any front panel settings you have made. To eliminate this problem, enter the Menu Mode, go to the Parallel Interface group and change the setting for I-Prime to Invalid. For more information on changing menu settings, see page 42. Problem 2 Nothing happens when I turn on the printer. Solution 1. Check the power cord connection to the outlet and to the printer. 2. If you are using a power strip, make sure it is turned ON, and that the fuse hasn't blown or that the circuit breaker hasn't tripped. 3. If the solution is not obvious - call for service. 65 • Troubleshooting