Oki MICROLINE 8810 Users Guide - Page 51
Check Print Area, Code Cont. I-Prime, CSF Select, CutSheet Smooth, Data Word, Diagnostic Test
View all Oki MICROLINE 8810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Check Print Area Applies to manual feed from the platform with Auto Alignment enabled. Determines whether or not data which is outside the normal print area specified for the page prints. The default is Valid: data overflow does not print. This prevents such data from printing on the platen. Caution! If you change this setting to Invalid, data could print directly on the platen and damage the printhead. Code Page Choose the Code Page character set you wish to use: USA [the default], Canada French, Multilingual, Portugal, Norway, BRASCII, Abicomp, Multilingual 858, or ISO 8859-15. Cont. I-Prime Sets what happens when an I-Prime signal is received. To prevent any movement of the printhead when an I-Prime signal is received, change the setting to Invalid. CSF Select Applies only when two optional CSFs are installed. Determines which CSF (front or rear) is used/selected first. CutSheet Smooth Helps to correct for paper curl when feeding in a form manually through the platform. Available settings: Valid [the default] or Invalid. Data Word ML emulation only. Sets the character code and graphics data for 8Bits [the default] or 7 Bits. Diagnostic Test Applies only when the optional RS-232C Serial Interface is installed. To run the diagnostic test, enter the menu and select Yes. DRAFT Mode Choose HSD (High Speed Draft) [the default] or SSD (Super Speed Draft). Microline 8810 User's Guide Explanation of Menu Items • 51