Oki MICROLINE 8810 Users Guide - Page 86

Press LOAD SW, Paper Set Alarm

Get Oki MICROLINE 8810 PDF manuals and user guides View all Oki MICROLINE 8810 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 86 highlights

Path Changing Remove Cut Sheet The printer is attempting to change paper paths from Manual Feed to Front Feed, but print media is loaded on the platform. Press FF to remove the media from the platform. Path Changing Remove Paper The printer is attempting to change paper paths from continuous forms to individual sheets/forms, but print media from the front tractor or the optional Rear Push Tractor is loaded. Press LOAD to park the continuous forms. Press LOAD SW The printer is waiting for paper to load from the optional CSF. Press LOAD. Cover Open Close Cover Close the top cover. Paper Feed Alarm Re-Set Paper Print media on the platform has miss-fed into the printer. Press SEL, then press LOAD to eject the media, then try loading it again. Paper Set Alarm Re-Set Paper The paper is not installed correctly. Remove and reinstall it. Left Margin Err Check Margin The left margin setting needs to be adjusted for the print media. Check to be sure that the Align x Pos. Adjust value you have selected as appropriate. See page 47. Head Thermal Single Pass The printhead has a thermal sensor which has detected that the printhead is too hot. The printer has switched to uni-directional printing until the printhead cools down. Microline 8810 User's Guide Troubleshooting • 86

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
Microline 8810 User’s Guide
Troubleshooting • 86
Path Changing
Remove Cut Sheet
The printer is attempting to change paper paths from Manual Feed
to Front Feed, but print media is loaded on the platform. Press FF
to remove the media from the platform.
Path Changing
Remove Paper
The printer is attempting to change paper paths from continuous
forms to individual sheets/forms, but print media from the front
tractor or the optional Rear Push Tractor is loaded. Press LOAD to
park the continuous forms.
Press LOAD SW
The printer is waiting for paper to load from the optional CSF. Press
LOAD.
Cover Open
Close Cover
Close the top cover.
Paper Feed Alarm
Re-Set Paper
Print media on the platform has miss-fed into the printer. Press
SEL, then press LOAD to eject the media, then try loading it again.
Paper Set Alarm
Re-Set Paper
The paper is not installed correctly. Remove and reinstall it.
Left Margin Err
Check Margin
The left margin setting needs to be adjusted for the print media.
Check to be sure that the Align x Pos. Adjust value you have
selected as appropriate.
See page 47.
Head Thermal
Single Pass
The printhead has a thermal sensor which has detected that the
printhead is too hot. The printer has switched to uni-directional
printing until the printhead cools down.