Oki ML421 Maintenance Manual - Page 51

Press the FF/LOAD switch.

Get Oki ML421 PDF manuals and user guides View all Oki ML421 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Oki Data CONFIDENTIAL (2) When using the continouos paper 1) Set the change lever either to the rear side or the bottom side position. (See Figure 2-16.) 2) Set a sheet of paper either to the push tractor or the bottom tractor. 3) Press the "FF/LOAD" switch. 4) The LF motor starts its operation to feed the paper up to the print start position. 5) The paper is fed in up to the TOF position (Factory default: 0.85 inches from the top). Push down the "FF/LOAD" switch. Detection of the sheet supplied PE LF action Line feed (about 3 inches) until the detection of the sheet supplied When the "FF/LOAD" switch is pushed down, the LF motor feeds in the sheet about 3 inches. When the LF motor completes the operation and the sheet has not been fed in, the feeding operating operation becomes, ineffective, thus resulting in the feeding jam. 42113901 Rev.2 51 /

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
42113901
Rev.2
51 /
Oki
Data
CONFIDENTIAL
Detection of the sheet supplied
PE
LF action
Line feed (about 3 inches) until the
detection of the sheet supplied
(2)
When using the continouos paper
1)
Set the change lever either to the rear side or the bottom side position. (See Figure
2-16.)
2)
Set a sheet of paper either to the push tractor or the bottom tractor.
3)
Press the “FF/LOAD” switch.
4)
The LF motor starts its operation to feed the paper up to the print start position.
5)
The paper is fed in up to the TOF position (Factory default: 0.85 inches from the top).
Push down the “FF/LOAD” switch.
When the “FF/LOAD” switch is pushed down, the LF motor feeds in the sheet about 3
inches. When the LF motor completes the operation and the sheet has not been fed in,
the feeding operating operation becomes, ineffective, thus resulting in the feeding jam.