Oki ML8810 ML8810 User's Guide - English - Page 17
Loading Print Media, Individual Sheets/Forms (“MANUAL”), Specifications
View all Oki ML8810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Loading Print Media Individual Sheets/Forms ("MANUAL") The printer is set at the factory for • single sheets/forms • Auto Align mode • Normal print mode • automatic printhead gap IMPORTANT! If you are using individual multi-part forms which have multiple pages of differing lengths such as the one shown below, switch to the rear Eject Direction to eliminate possible jams. • To temporarily switch, press the LOAD/EJECT DIR switch. • To permanently change to the rear Eject Direction, go into the menu and change the setting for Eject Dir. in the Manual Feed (or CSF Front and/or CSF Rear if these options are installed) group to Rear: 1. Press SEL to deselect the printer. 2. Press MODE + SHIFT simultaneously. 3. Press and hold SHIFT, then press FF repeatedly until you see Manual Feed on the display. 4. Press FF repeatedly until you see Eject Dir. on the display. 5. Press MODE to change the setting to Rear. 6. Press LOAD to save the setting and exit the menu. Specifications Individual Sheets/Forms, for Use with Auto Align Mode Microline 8810 User's Guide 17