Oki ML8810 ML8810 User's Guide - English - Page 50
Align1 Pos. Adj., Auto Align, etc.
View all Oki ML8810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Applies to continuous forms fed through the optional Rear Push Tractor. Adjusts the set horizontal location for printing the first character on a form when using manual feed from the platform. Selectable settings: Left 10, Left 9, ... Left 2, Left 1, Right 1, Right 2 ... Right 9, Right 10, in increments of 1/180 inch (0.14 mm). The default is 0. Align1 Pos. Adj. Align2 Pos. Adj. Align3 Pos. Adj Align4 Pos. Adj. Note To use this setting, The corresponding Align 1/ Align 2/ Align 3 / Align 4 setting must be selected for Auto Align or Auto Align (POW). Use these to set up to four custom values for the left margin on forms when you are using manual feed from the platform. This represents the distance from the left edge of the page to the left side of the first printed character. Adjusts within a range of 0 to 45.4 mm, in 1/90-inch [0.26 mm] increments. The default setting is 5.1 mm. Auto Align Applies only to manual feed from the platform. When Auto Align is engaged (the printer default), you can use the front panel switches to change to a different preset left margin value (Align 1, 2, 3, or 4). The values are set in the menu under Align1 Pos. Adj., etc. This lets you quickly switch to another form which requires a different left margin. For more information on using the front panel to change Align settings, see page 11. If MemoryAutoAlign (see page 60) is set to Valid [the default], whichever Align setting you last used will be saved in memory and engaged the next time you turn on the printer. Note This setting does not apply when the printer initializes in response to an I-PRIME signal. Microline 8810 User's Guide 50