Oki MPS2731mc MC362w/MC562w/MPS2731mc Basic Users Guide (English) - Page 58
Setup to use the WSD Scan, Installation procedure
View all Oki MPS2731mc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
SETUP TO USE THE WSD SCAN The following explains how to set up the PC to use the WSD Scan function. In order to use the WSD Scan function, install this device on the PC. WSD Scan can be used from Scan To Local PC and Scan To Remote PC via Network. To use WSD Scan, the machine has to be connected with the computer which Windows Vista/ Windows7/ Windows Server 2008/ Windows Server 2008R2 was installed via Network. REFERENCE Before starting the following procedure, be sure to check the network connection. For details, see the Configuration Guide. NOTE If a scanner is used via WSD Scan connection and if the device IP address is changed, select Uninstall in step 2 of Installation procedure and uninstall the scanner, and then execute the install procedure again. INSTALLATION PROCEDURE MEMO When you follow the procedure below, the WIA is installed automatically as the scanner driver. NOTE Before starting the installation, select Network and Sharing Center from the Control Panel and make sure that Network Search is enabled. 1. From the Start menu, select Network. The devices connected to the network are displayed. 2. Right-click the MC362 icon under Multifunction Devices and select Install. If the User Account Control dialog box is displayed, click Yes. Scanning > 58