Oki MPS4200mb MB461/471/491/MPS4200mb User Guide - Page 145
Network Connection Problems, Common to Windows and Mac OS X, For Windows, Cause, Remedy, Reference
View all Oki MPS4200mb manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Other Issues Cause The Job Type of "Secure Print", "Store to HDD" and "Encrypted Secure Print" are unselectable on the MB491. Remedy Reference For Windows PCL Driver 1.Click [Start] > [Devices and Printers]. 2.Right-click the [OKI MB491(PCL)] icon and select [Printer properties]. (If you have installed multiple printer drivers, select [Printer properties] > [OKI MB491(PCL)]). 3.Select the [Device Options] tab. 4.For the network connection, select [Get Printer Settings]. For the USB connection, add a check to [SD Memory Card]. 5.Click [OK]. Advanced For Windows PS Driver 1.Click [Start] > [Devices and Printers]. 2.Right-click the [OKI MB491(PS)] icon and then select [Printer properties]. (If you have installed multiple printer drivers, select [Printer properties] > [OKI MB491(PS)].) 3.Select the [Device Settings] tab. 4.For the network connection, select [Get installed options automatically] under [Installable Options], and then click [Setup]. For the USB connection, select [Installed] for [SD Memory Card] under [Installable Options]. 5.Click [OK]. Network Connection Problems Troubleshooting Common to Windows and Mac OS X Cause Remedy 7 Reference Using a crossover cable. Use a straight cable. The machine is turned on before a cable Connect cables before turning on the machine. was connected. The hub and the machine are incompatible Press the key and select [Admin Setup] > or have some problem. [Network Menu] > [Network Setup] > [HUB Link Setting], and then select [10BASE-T HALF]. P.47 - For Windows Cause IP address is incorrect. All pages are not printed. Remedy Reference z Check that the same IP address is set for the machine and the machine's port setting on the computer. z If using OKI LPR Utility, check the IP address setting in OKI LPR Utility. P.59 If you are using the WSD port, change it to the standard TCP/IP port. USB Connection Problems Common to Windows and Mac OS X Cause Remedy Unsupported USB cable is being used. An USB hub is being used. Printer driver is not installed correctly. Use a USB2.0 cable. Directly connect the machine to the computer. Reinstall printer driver. Reference - P.55 P.55 - 145 -