Oki OKIPAGE14e Users' Guide for the OkiLAN 6010e - Page 102
The Dynamic Host Configuration Protocol DHCP, Gleaning does not work with Windows NT
View all Oki OKIPAGE14e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Section IV - TCP/IP 2. Start a continuous ping to the OkiLAN 6010e. ping Example: ping 192.168.42.24 On some systems, this may require an additional parameter. Some implementations of ping only send out one ping packet which could get lost in transit. Check your system documentation for more information. 3. Connect power to the OkiLAN 6010e. The OkiLAN 6010e will glean its IP address from the ping packet. This IP address will remain in effect until the OkiLAN 6010e is powered off or reset. Therefore, a permanent IP address should be assigned by running the OkiNet for TCP/IP utility or via telnet. Note: Gleaning does not work with Windows NT Workstation 3.5. DHCP The Dynamic Host Configuration Protocol (DHCP) provides a framework for passing configuration information to hosts on a TCP/IP network in a client/server fashion. DHCP is based on the Bootstrap Protocol (BOOTP), adding the capability of automatic allocation of reusable network addresses and additional configuration options. DHCP uses the same packet structure as BOOTP so current BOOTP relay agents will also interact with DHCP messages. IV - 12 OKI OkiLAN 6010e User's Guide