Oki OKIPAGE14e Users' Guide for the OkiLAN 6010e - Page 168
consult a manual on the RARP daemon and how, to start it.
View all Oki OKIPAGE14e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Section IV - TCP/IP 5. The rarpd daemon transmits a response to the OkiLAN 6010e with the IP address 192.168.42.55. The OkiLAN 6010e will then use this IP address for all subsequent transmissions. For all these steps to work properly, at least one RARP daemon (rarpd) must be running on the RARP server. On most UNIX systems, this can be tested by using the ps command with the show all processes option. Unfortunately, the ps options differ from one UNIX workstation to another. Perform a man ps at the UNIX prompt to consult a manual page on the ps command for a particular workstation. If rarpd is not running on a workstation, type man rarpd at the UNIX prompt to consult a manual page on the RARP daemon and how to start it. Limitations Often TCP/IP networks are divided into subnets. RARP does not work across subnets. When installing an OkiLAN 6010e, make sure the following two criteria are met for RARP to work properly. 1. Both the RARP server and the OkiLAN 6010e are physically attached to the same subnet. 2. The IP address assigned to the OkiLAN 6010e and the IP address of the RARP server belong to the same subnet. IV - 78 OKI OkiLAN 6010e User's Guide