Olympus 120526 Stylus 120 Instruction Manual (English) - Page 10
Correcting The Date And Time, Rc-300c Optional
UPC - 050332139442
View all Olympus 120526 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
18 RC-300C (Optional) If the selftimer/remote control indicator doesn't blink even when you press the button, replace the battery with a new one (CR2025). How to replace the battery of the remote control (RC-300C) 1 1. Turn the screw on the bottom of the remote control counterclockwise to loosen. 2 2. Turn the remote control over, and remove the cover. Remove the old battery and insert a new battery with ⊕ facing up as shown. 3 3. Replace the cover, turn the remote control over, and turn the screw on the bottom clockwise to tighten. REMOTERCCO-3N00TCROL CORRECTING THE DATE AND TIME 19 Be sure to correct the date and time after the battery has been inserted or replaced. 1 1. Keep the MODE button pressed until the "year" indicator starts blinking. 2. Press the SET button to adjust the "year" indicator. If you press the 2 button once, the number on the display will advance by 1. If you keep the button pressed, the numbers will run in rapid succession. If you pass the intended number, keep pressing to return to that number. 3 3. Press the MODE button once more to make the "month" indicator blink. Press the SET button to adjust the "month" indicator. As you press the MODE button, the blinking indicator changes in the order of "year", "month", "day", "hour" and "minute". 4 4. Repeat Steps 2 and 3 to set "hour" and "minute". Make sure the "minute" indicator is blinking. 5 5. When "minute" has been set, press the MODE button. None of the indicators will be blinking and date/ time correction is now complete.