Olympus 120526 Stylus 120 Instruction Manual (English) - Page 5
Tloading The Film Wtaking Pictures
UPC - 050332139442
View all Olympus 120526 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
8 1 2 3 LOADING THE FILM 1. Slide the back cover release upward to open the back cover. Do not touch the inside of the camera, especially the lens. 2. Insert the film cartridge until it clicks into position. ISO400 film is recommended. If you are going to use non-DX-coded film, use ISO100 film. Correct Incorrect 3. Align the film leader with the guide line (A), and place the film between the positioning guides (B). Then close the back cover until it clicks. Make sure the back cover release has returned to the lower position. The film automatically advances to the first frame. 4. Open the lens barrier until it clicks. Make sure the exposure counter on the LCD panel reads " ". If " " blinks, reload the film. TAKING PICTURES 9 1 2 Autofocus marks 3 1. Open the lens barrier until it clicks. The lens will extend slightly and the LCD panel will turn on. Compose your shot. Push the zoom lever to the "T" side for telephoto (120mm) or to the "W" side for wide angle (38mm). After about 4 minutes and 30 seconds of inactivity, the lens retracts and the LCD panel goes out. 2. Position the autofocus marks on your subject. Do not look at the sun or other strong light sources through the viewfinder. 3. Press the shutter release button halfway to focus on the subject. After making sure that the green lamp lights, press the shutter release button all the way to take the picture. After the shutter is released, the film automatically advances to the next frame. Wide Multi-Autofocus System This camera uses a wide multiautofocus system that makes it easier for the focus to lock on the subject even if it's not in the center of the frame.