Olympus 120526 Stylus 120 Instruction Manual (English) - Page 11
Care And Storage, Printing The Date/time
UPC - 050332139442
View all Olympus 120526 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
20 PRINTING THE DATE/TIME First select the date/time mode you want to print. Press the MODE button. As you press it, the mode will switch in the order shown below. Keep the mode you want to print displayed. None Year-month-day Month-day-year Day-month-year Day-hour-minute • The date unit uses the same power source as the camera. • Be sure to correct the date and time after the battery is replaced. • The date/time is imprinted in the lower right corner of the picture. • If the date/time is superimposed on a bright color like white, orange, yellow, etc., it may be difficult to read. • The date/time may not be imprinted correctly on the frame(s) after the specified final exposure of the film. • When black-and-white film is used, the date/time may not be printed. CARE AND STORAGE 21 țDo not leave the camera in any place exposed to excessive heat, humidity or direct sunlight - for example, in a car or on the beach. țDo not expose the camera to formalin or naphthalene. țIf the camera gets wet, wipe it with a dry towel. The salt in seawater can be especially damaging. țDo not use organic solvents such as alcohol or paint thinner when cleaning the camera. țDo not leave the camera on or near a television, refrigerator or other appliance with a magnetic field. țDo not expose the camera to dust or sand as this could cause serious damage. țDo not shake the camera. țDo not apply excessive force to the zoom lens. țDo not expose the camera to extreme heat (over 40°C/104°F) or to extreme cold (below -10°C/14°F). Low temperatures, even within this range may sometimes cause deterioration in battery performance, temporarily disabling the camera. țAvoid leaving the camera unused for long periods of time. This can cause mold to grow on the camera as well as other problems. Try to press the shutter release button and check the operation of the camera before use. țSome airport X-ray machines can damage the film in your camera. Try to avoid passing your camera through these machines. Give it to the security officer for manual inspection. țDo not touch the front surface of the flash after using it continuously over a short period as the surface may be hot.