Olympus D-575 Zoom D-575 Zoom Reference Manual (English - 6.1MB) - Page 27
Startup/Shutdown screen, If the card is not recognized (card check), Monitor, indication
View all Olympus D-575 Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Power on/off Startup/Shutdown screen This image is displayed on the monitor each time the camera is turned on or off. You can also use your favorite image. (P.113) Getting started 1 Startup/Shutdown screen (Factory default setting) If the card is not recognized (card check) When the power is turned on, the camera checks the card automatically. If there is no card in the camera or a card that is not supported by this camera is inserted, one of the following screens will be displayed. • All data stored on the card is erased when the card is formatted. Note Monitor indication NO CARD CARD%SEtUP POWER%OFF SELECt FORMAt GO Corrective action There is no card in the camera or the card is not inserted properly. → Insert a card. If a card is already inserted, remove it and insert it again correctly. The card cannot record, play back or erase pictures. Replace with a new card, or format the card. → Press to select POWER OFF, and press . Replace it with a new one. → Format the card. Press to select FORMAT, and press to display the confirmation screen. Select YES and press . Formatting starts. If the card was successfully formatted, the camera is ready to take pictures. 26