Olympus D-575 Zoom D-575 Zoom Reference Manual (English - 6.1MB) - Page 95
Recording sound
![]() |
View all Olympus D-575 Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Recording sound Sound can be added to a still picture that you have already taken. (This is known as "after-recording".) You can also re-record over the sound that has already been recorded. Total recording time per picture is approximately 4 seconds. 1 Use the arrow pad to select the still picture you want to add sound to. "Viewing still pictures" (P.84) 2 Press . • The top menu is displayed. 3 In the top menu, select MODE MENU Æ PLAY Æ . "How to use the menus" (P.33) 4 Press to display START. 5 Turn the camera microphone 5 toward the sound you want to record and press to start recording. • The BUSY bar is displayed during recording. SEt CARD EDIt PLAY Playback button ( ) OK button Arrow pad StARt Playback • To obtain the optimum sound, the microphone should be placed no farther than 1 m (3.3 ft.) away from the subject. Note • If you re-record the sound, the original sound is erased. • You may not be able to record sound when there is insufficient card memory (the "CARD FULL" message is displayed). • Sound recording may pick up camera noises, such as button operation or shutter movement. • Once sound is added to a picture, it is not possible to erase only the sound. In this case, make a re-recording with silence. • The camera does not have a function to play back recorded sound. 94
![](/manual_guide/products/olympus-d575-zoom-d575-zoom-reference-manual-english-61mb-7614d42/95.png)