Olympus E-20 E-20N Reference Manual (English) - Page 122

Taking Sequential Exposures (Burst Mode) With the burst mode, press and hold down the shutter button to take rapid shots. In IS mode you can take up to three or four sequential shots (depending on the record mode) (© 79). In PS mode you can take up to seven sequential shots (© 81). 1 Set the mode dial to P, A, S, or M. 2 Press and hold down the drive button , and then turn the main dial or sub dial until you see the sequential mode mark appear 1 in the control panel. 2 3 OFF ON 3 Take the picture. The camera will continue to shoot exposures as long as you hold down the shutter button. The camera will stop shooting if you lift your finger from the shutter button. The number of multiple exposures is displayed in the control panel. Control panel Sequential mode mark Number of storable pictures Number of sequential exposures (Gauge shows 3 exposures) Camera will not shoot after pressing shutter button? blinking in the viewfinder? If this mark is blinking, the built-in flash is charging. Wait for the mark to stop blinking. After the flash is charged, the flash mark will light and remain on. and number of storable pictures blinking? If the card error and the number of storable pictures are blinking, this means the memory card is full. Replace the full card with another card, or delete pictures from the full card that are no longer needed. 120