Olympus E-300 EVOLT E-300 Advanced Manual (English) - Page 209
Release Priority C
UPC - 050332298859
View all Olympus E-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
AGGLWLRQDO functions DYDLODEOHDIWHUILUPZDUHXSGDWe )XQFWLRQVDYDLODEOHLQ(92/7(ILUPZDUHYHUVLRQ ● SHADING COMP. In some cases, the edges of the image may be shadowed due to the properties of the lens. The SHADING compensation function compensates by increasing brightness at the dark edge of the image. Especially when a wide-angle lens is used, this function is able to work effectively. To enable the function, in the Camera 2 menu, select CHADING COMP., select ON, and then press the OK button. NOTES: ● -- This function is not available when a teleconverter or inner tube extension is attached ● to the camera. -- At higher ISO settings, noise at image edges may be conspicuous. ● -- The function is not avaialble when the record mode is set to RAW or RAW+JPEG. ● ANTI-SHOCK This dimishes camera shake caused by vibrations when the mirror moves. You can ● select the interval from the time the mirror is raised until the shutter is released. To use this function, in the Camera 2 menu, select ANTI-SHOCK and then OFF. ● Next, press the up or down arrow button to select the interval (from 1 to 30 seconds). Finally, press the OK button. )XQ ● RELASE PRIORITY S In the S-AF mode, you can release the shutter button and take a picture without waiting until focusing and flash charge are finished. This function is useful when you need to take advantage of a shutter-release opportunity. To use this function, in the Setup 1 menu, select RELEASE PRIORITY S, then ● ON and then press the OK button. ● ● RELEASE PRIORITY C In the C-AF mode, you can release the shutter button and take a picture without waiting until focusing and flash charge are finished. This function is useful when you ● need to take advantage of a shutter-release opportunity. When RELEASE 12 PRIORITY C is set to ON, PREDICTIVE AF is not available. To use this function, in the Setup 1 menu, select RELEASE PRIORITY C > ON, and then press the OK button. 209 Information