Olympus FE 290 FE-290 Instruction Manual (English) - Page 25

PIXEL MAPPING Adjusting the image processing function The pixel mapping feature allows the camera to check and adjust the CCD and image processing functions. It is not necessary to operate this function frequently. Approximately once a year is recommended. Wait at least one minute after taking or viewing pictures to allow the pixel mapping function to perform properly. If you turn the camera off during pixel mapping, start again. Select [PIXEL MAPPING]. When [START] is displayed, press H. K/q Turning on the camera with the K or q button YES NO Pressing K turns on the camera and starts the camera in the shooting mode. Pressing q turns on the camera and starts the camera in the playback mode. The power is not turned on. To turn on the camera, press o. s Adjusting the monitor brightness BRIGHT/ NORMAL BEEP Adjusting the volume of operation sound when the buttons are pressed OFF (No sound)/ LOW /HIGH 8 Adjusting the volume of camera warning sound OFF (No sound)/ LOW / HIGH SHUTTER SOUND Adjusting the volume of the shutter button OFF (No sound)/ LOW / HIGH VOLUME Adjusting the volume during playback SETUP 1 2 BEEP 3 SHUTTER SOUND VOLUME BACK MENU SET OK • Press ON to adjust the volume. • You can adjust the volume to one of five levels or mute the volume. Menu operations EN 25