Olympus Stylus 740 Stylus 750 Instruction Manual (English) - Page 20

ISO Changing the ISO sensitivity AUTO 80/100/200/ 400/800/1600 Sensitivity is automatically adjusted according to the conditions of the subject. A low value lowers the sensitivity for daylight shooting of clear, sharp pictures. The higher the value, the better the camera's light sensitivity and ability to shoot with a fast shutter speed and in low light conditions. However, high sensitivity introduces noise into the resulting picture, which may give it a grainy appearance. DRIVE...Continuous shooting o Shoots 1 frame at a time when the shutter button is pressed. j Focus and exposure are locked at the first frame. The sequential shooting speed varies depending on the setting of record mode. i Pictures can be taken at a faster speed than normal sequential shooting. You can take a sequence of pictures at one time while holding down the shutter button. The camera will take pictures in sequence until you release the shutter button. • In [ i ], the settings will be changed as follows. • The flash mode is fixed at [$]. • [ISO] is fixed at [AUTO]. • [IMAGE QUALITY] is limited to [2048 × 1536]. ESP/n Changing the area for measuring the brightness of a subject ESP Meters the brightness at the center of the monitor and the surrounding area separately to create a picture with balanced brightness. When taking pictures against strong backlight, the center of the picture may appear dark. n Only the center of the monitor is metered. Suitable for taking a picture of the subject in the center of the monitor against backlight. DIGITAL ZOOM Zooming in on your subject OFF /ON The digital zoom can be used to take close-up pictures with stronger magnification than the optical zoom. (Optical zoom × Digital zoom: the maximum approximately 28×) Optical zoom Digital zoom P P [] [IN] HQ 3072×2304 4 [] Zoom bar [IN] HQ 3072×2304 4 White area: The optical zoom area Red area: The digital zoom area Menu operations 20 EN