Olympus Stylus Stylus 750 Instruction Manual (English) - Page 55
Using a new card, Lamp indicators, Extending the useful life of the battery - 120
UPC - 050332158542
View all Olympus Stylus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Getting to know your camera better Movie Image quality Image size SHQ HQ SQ 640 × 480 (15 frames/sec.) 320 × 240 (30 frames/sec.) 160 × 120 (15 frames/sec.) Recording length Internal memory Using a 512 MB card 19 sec. 563 sec. 46 sec. 1334 sec. 117 sec. 3395 sec. Using a new card • If you use a non-Olympus card or a card used for another application, such as for a computer, the message [CARD ERROR] is displayed. To use this card with this camera, use the [FORMAT] function to format the card. g "MEMORY FORMAT (FORMAT) Formatting the internal memory or card" (P. 30) Lamp indicators This camera uses several lamps to indicate the camera status. Lamp Self-timer lamp Card access lamp Green lamp of the monitor Status The lamp lights for approximately 10 seconds, blinks for approximately 2 seconds, and then the picture is taken. Blinking: A picture is being recorded, the camera is reading a movie, or images are being downloaded (when connected to a computer). • Do not do any of the following while the card access lamp is blinking. Doing so may prevent the image data from being saved and render the internal memory or card unusable. • Open the battery compartment/card cover • Remove the battery. • Connect or disconnect the AC adapter. Lit: The focus and exposure are locked. Blinking: The focus and exposure are not locked. • Release your finger from the shutter button, re-position the AF target mark on the subject and press the shutter button halfway again. Extending the useful life of the battery • Performing any of the following operations when not actually taking pictures can deplete the battery power. • Repeatedly pressing the shutter button halfway • Repeatedly using the zoom • To minimize the battery consumption, set [POWER SAVE] to [ON] and turn off the camera whenever it is not in use. g "POWER SAVE Setting the camera to power save mode" (P. 34)" EN 55