Olympus Tough TG-820 iHS Tough 820 iHS Instruction Manual (English) - Page 11
Preparing the Camera, Inserting the battery and card
View all Olympus Tough TG-820 iHS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Preparing the Camera Inserting the battery and card 1 TG-820 3 Lock knob TG-620 3 Battery/card cover latch TG-820 Write-protect switch TG-620 Write-protect switch 2 21 2 1 Battery/card/connector cover latch Battery/card/connector cover Lock knob Battery/card cover 2 TG-820 TG-620 Battery lock knob Battery lock knob TG-820: Insert the battery as illustrated with the C mark toward the battery lock knob. TG-620: Insert the battery as illustrated with the B mark toward the battery lock knob. Damage to the battery exterior (scratches, etc.) may produce heat or an explosion. Insert the battery while sliding the battery lock knob in the direction of the arrow. Insert the card straight until it clicks into place. Turn off the camera before opening the battery/card/ connector cover*. When using the camera, be sure to close and lock the battery/card/connector cover*. Slide the battery lock knob in the direction of the arrow to unlock, and then remove the battery. Always use SD/SDHC/SDXC cards or Eye-Fi card with this camera. Do not insert other types of memory cards. "Using the card" (p. 65) Do not touch the contact area of the card directly. This camera can be used without a card by storing images in its internal memory. * TG-620: Battery/card cover and connector cover EN 11