Omron 10 Series Plus Instruction Manual - Page 24
seconds. Continue to press the Up or Down button until the desired
View all Omron 10 Series Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
SETTING TRUREADTM 4. Press the SET button to confirm the change. If on is selected, the number of seconds between each measurement is displayed. NOTE: The default value between each measurement is 60 seconds. 5. Press the Up or Down button ( / ) to change the interval of time between each measurement. The interval can be set to 15 seconds, 30 seconds, 60 seconds or 120 seconds. Continue to press the Up or Down button until the desired interval appears on the display. 6. Press the SET button to confirm the setting. The year flashes on the display. 24
4. Press the SET button to confirm the change.
If on is selected, the number of seconds between each measurement is
displayed.
NOTE:
The default value between each measurement is 60 seconds.
5. Press the Up or Down button (
/
) to change the interval of
time between each measurement.
The interval can be set to 15 seconds, 30 seconds, 60 seconds or 120
seconds. Continue to press the Up or Down button until the desired
interval appears on the display.
6. Press the SET button to confirm the setting.
The year flashes on the display.
SETTING TRUREAD
TM
24