Onkyo HT-R520 Owner Manual - Page 38
Using the Listening Modes - surround sound
View all Onkyo HT-R520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
)53@&OCPPL 1BHF .POEBZ .BSDI 1. Using the Listening Modes With its built-in surround-sound decoders and DSP programs, the HT-R520 can transform your home listening room into a movie theater or concert hall. To get the most from surround sound, it's important that you install and configure your speakers correctly. See "Connecting Your Speakers" on page 17 and "Speaker Configuration" on page 48. Listening mode availability depends on the format of the current input signal. For example, the Dolby Digital listening modes are available only while a Dolby Digital format signal is being input. The following table lists all the possible listening modes and indicates which modes can be selected for each input signal format. Input Signal Format PCM, analog Listening mode Source Direct Stereo PLII Movie/Music/Game *1 PLIIx Movie/Game *2 PLIIx Music *2 Neo:6 Cinema/Music CD, TV, LD, VHS, MD, vinyl, radio, cassette, cable, satellite, etc. ❍ ❍ ❍ ❍ ❍ ❍ Dolby Digital Dolby Digital EX *4 DTS DTS 96/24 DTS-ES Discrete *4 DTS-ES Matrix *4 DTS+Neo:6 *3 DTS+Dolby EX *3 Orchestra ❍ Unplugged ❍ Onkyo original Studio-Mix ❍ DSP TV Logic ❍ All Ch Stereo ❍ PCM 96 kHz 96 kHz/24 bit DVD, etc. ❍ ❍ Dolby Digital 3/2.1 or 3/3.1 2/0 (stereo) Other DVD, digital cable/satellite, etc. ❍ ❍ ❍ ❍ ❍ ❍ *3 ❍ ❍ ❍ ❍ 3/2.1 DTS 2/0 (stereo) 96/24 *5 DTS-ES DVD, LD, CD, etc. ❍ ❍ ❍ ❍ ❍ ❍ ❍ *3 ❍ ❍ *3 ❍ ❍ ❍ Discrete Matrix ❍ ❍ ❍ ❍ *1: Available when the Surr Back setting in the Speaker Configuration is set to None (see page 48). *2: Available when the Surr Back setting in the Speaker Configuration is NOT set to None (see page 48). *3: Available when the Surr Back setting in the Speaker Configuration is NOT set to None (page 48) and the Dolby Digital/DTS setting (page 42) is set to On. *4: Available when the Surr Back setting in the Speaker Configuration is NOT set to None (page 48) and the Dolby Digital/DTS setting (page 42) is set to either On or Auto. *5: For DTS 96 kHz/24-bit material, if the listening mode is Stereo or DTS 96/24, audio is processed at 96 kHz. For all other listening modes, it's processed at 48 kHz. Tip: You can check the format of a digital input signal on page 33, "Displaying Source Information." 38