Onkyo HT-RC370 Owner Manual - Page 12
Connections, Connecting the AV Receiver, Connecting Your Speakers
View all Onkyo HT-RC370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connections Connecting the AV Receiver Connecting Your Speakers Connecting the Speaker Cables The following illustration shows which speaker should be connected to each pair of terminals. If you're using only one surround back speaker, connect it to the SURR BACK L terminals. Front high right Front wide right Front right Front left Front wide left Front high left Center Surround right Surround back right Surround back left ■ Screw-type speaker terminals Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown. 1/2" to 5/8" (12 to 15 mm) ■ Banana Plugs (North American models) • If you are using banana plugs, tighten the speaker terminal before inserting the banana plug. • Do not insert the speaker code directly into the center hole of the speaker terminal. Surround left En 12