Onkyo HT-RC370 Owner Manual - Page 81
Connection Tips and Video Signal Path
View all Onkyo HT-RC370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Connection Tips and Video Signal Path The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your components. Use the following sections as a guide. The on-screen menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to other video outputs, use the AV receiver's display when changing settings. Video Connection Formats Video components can be connected by using any one of the following video connection formats: composite video, S-Video, PC IN (Analog RGB), component video or HDMI, the latter offering the best picture quality. Tip • For optimal video performance, THX recommends that video signals pass through the system without upconversion (e.g., component video input passing through to component video output). Video input signals flow through the AV receiver as shown, with composite video, S-Video, PC IN (Analog RGB) and component video sources all being upconverted for the HDMI output. The composite video, S-Video and component video outputs pass through their respective input signals as they are. Video Signal Flow Chart Blu-ray Disc/DVD player, etc. Composite S-Video PC IN Component (Analog RGB) IN HDMI AV receiver MONITOR OUT Composite S-Video Component HDMI ■ Signal Selection If signals are present at more than one input, the inputs will be selected automatically in the following order of priority: HDMI, component video, PC IN (Analog RGB), S-Video and composite video. However, for component video only, regardless of whether a component video signal is actually present, if a component video input is assigned to the input selector, that component video input will be selected. And if no component video input is assigned to the input selector, this will be interpreted as no component video signal being present. In the Signal Selection Example shown on the right, video signals are present at both the S-video and composite video inputs, however, the S-video signal is automatically selected as the source and video is output by the S-Video and HDMI outputs. TV, projector, etc. Signal Selection Example Blu-ray Disc/DVD player, etc. Composite S-Video PC IN Component (Analog RGB) IN HDMI AV receiver MONITOR OUT Composite S-Video Component HDMI TV, projector, etc. En 81