Onkyo HTP-240 Owner Manual - Page 6

)51GN 1BHF  8FEOFTEBZ %FDFNCFS Various Mounting Methods Front Speaker Bases If you intend to stand the front speakers on the floor or on a TV stand or AV stand, you should attach the supplied front speaker bases. To do this, align the mounting holes in the base with base/stand inserts on the front speaker's rear panel, and secure by using four of the supplied fixing screws. Wall Mounting The front speakers, center speaker, surround speakers, and surround back speaker (SKS-HT240 only) can easily be wall mounted by using the keyhole slots. To prevent the speaker from vibrating against the wall, attach four of the supplied spacers to the keyhole fins on the rear of each speaker. ■ Mounting vertically To mount the front speakers, surround speakers, or surround back speaker (SKS-HT240 only) vertically, use the keyhole slot shown to hang each speaker on a screw that's securely screwed into the wall. Front speaker 2-9/16" 2-9/16" Base/stand inserts Mounting holes 4-7/8" Spacers Keyhole slot for vertical wall mounting Center Speaker Base The center speaker base is for mounting the center speaker horizontally. If you put it on a TV stand or AV stand, aim it toward the listening position. The center speaker should sit securely on the base. If it's loose, try resetting it. Note: • If you put the center speaker on the floor, take it off the base and position it so that it's facing slightly up toward the listener's ears. Spacers Bottom Surround/Surround Back speaker 2-9/16" 2-9/16" 1-13/16" Keyhole slot for vertical wall mounting Spacers Base for horizontal mounting 6 Spacers Bottom