Onkyo HTP-240 Owner Manual - Page 7
Using the Optional Speaker Stands, Using Speaker Mounts/Brackets
View all Onkyo HTP-240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
)51GN 1BHF 8FEOFTEBZ %FDFNCFS Various Mounting Methods-Continued ■ Mounting horizontally To mount the center speaker horizontally, use the two keyhole slots shown to hang each speaker on two screws that are securely screwed into the wall. Center speaker Spacers Keyhole slots for horizontal wall mounting Spacers Using Speaker Mounts/Brackets Threaded inserts for 1/4-inch machine screws are provided on the rear of each speaker for wall-mounting with commercially available speaker mounts and brackets. Refer to the manual supplied with your mounts or brackets for installation details. 2-9/16" 2-9/16" 4-7/8" 7-9/16" 4-7/8" Caution: A mounting screw's ability to support a speaker depends on how well it's anchored to the wall. If you have hollow walls, screw each mounting screw into a stud. If there are no studs, or the walls are solid, use suitable wall anchors. Use screws with a head diameter of 3/8 inch or less and a shank diameter of 1/8 inch (or 4 mm) or less (No. 8 or smaller). With hollow walls, use a cable/pipe detector to check for any power cables or water pipes before making any holes. (We recommend that you consult a home installation professional.) Using the Optional Speaker Stands Optional Onkyo speaker stands (AS-240) are available for the front left and right and surround left and right speakers. To attach a speaker to a stand, align the mounting holes in the stand with those on the speaker's rear panel, and secure by using four of the supplied fixing screws. Use this hole if mounting vertically Use this hole if mounting horizontally Note: The portion of the screw that goes into the speaker's threaded insert should be between 1/5 and 3/8 of an inch long. Mount or bracket 1/4" 1/5"-3/8" 7