Onkyo NS-6170 User Manual English etc. - Page 25

> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Network ∫ Connection ∫ Proxy Port E Displays/Sets the proxy server port number when you enter "Proxy URL". N Select the type connection to the network. Select the item with / on the remote controller and press ENTER. "Wi-Fi": To connect via wireless LAN "Wired" (Default Value): To connect via wired LAN Perform "Wi-Fi Setup" if you select "Wi-Fi". ∫ Friendly Name Change the device name for this unit which is shown on other devices connected to the network to an easily recognized name. You can input up to 31 characters. For details on how to enter text, refer to "Entering text" ( P22). ∫ Wi-Fi Setup Make Wi-Fi connection settings. ( P10) This can be set only when "Wi-Fi" is selected in "Connection". 0 You can make Wi-Fi connection settings using a web browser on a computer. For details, refer to "Web Setup" ( P27). ∫ DHCP ∫ AirPlay PW You can set a password of up to 31 characters so that only registered users can use AirPlay. For details on how to enter text, refer to "Entering text" ( P22). ∫ Network Check You can check the network connection. The confirmation results are displayed when you press ENTER. Select the item with / on the remote controller and press ENTER . "On" (Default Value): Auto configuration by DHCP "Off": Manual configuration without DHCP If selecting "Off", you must set "IP Address", "Subnet Mask", "Gateway", and "DNS" manually. ∫ IP Address Displays/Sets the IP address. ∫ Subnet Mask Option ∫ PWR Setting Auto Standby This setting places the unit on standby automatically after 20 minutes of inactivity without any audio input. "On" (Default Value): The unit will automatically enter standby mode. "Off ": The unit will not automatically enter standby mode. Displays/Sets the subnet mask. ∫ Gateway Displays/Sets the gateway. ∫ DNS Displays/Sets the primary DNS server. NET Stby When this feature is turned "On", you can turn on the power of the unit via the network using an application that can control this unit. Select the item with / on the remote controller and press ENTER. 0 Setting to "On" (Default Value) increases the power consumption even when the unit is on standby. 0 "NET Stby", which suppresses power consumption, may be disabled when the network connection is lost. ∫ Proxy URL Displays/Sets the proxy server URL. 25