Onkyo TX-8250 User Manual English etc - Page 33
Network, Bluetooth
View all Onkyo TX-8250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others 5. Network 0 When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the setting automatically. Further, to assign fixed IP addresses to each component, you must set "DHCP" to "Disable" and assign an address to this unit in "IP Address" as well as set information related to your LAN, such as Subnet Mask and Gateway. Wi-Fi Wi-Fi Setup SSID Signal Stat MAC Address DHCP IP Address Subnet Mask Gateway DNS Server Proxy URL Proxy Port Connect the unit to network via wireless LAN router. "On": Wireless LAN connection "Off (default value)": To connect via wired LAN You can configure wireless LAN settings by pressing ENTER when "Start" is displayed. 0 This is displayed only when "On" is selected in "Wi-Fi". 0 Refer to Initial Setup (P13) for Wi-Fi settings. The SSID of the connected access point The signal strength of the connected access point The status of the connected access point This is the MAC address of this unit. This value is specific to the component and cannot be changed. "Enable (default value)": Auto configuration by DHCP "Disable": Manual configuration without DHCP If "Disable" is selected, you must set "IP Address", "Subnet Mask", "Gateway", and "DNS Server" manually. Displays/Sets the IP address. Displays/Sets the subnet mask. Displays/Sets the gateway. Displays/Sets the primary DNS server. Displays/Sets the proxy server URL. Displays/Sets the proxy server port number when you enter "Proxy URL". Friendly Name AirPlay PW Network Check Change the device name for this unit which is shown on other devices connected to the network to an easily recognized name. This is set to Onkyo TX-8250 ****** at the time of purchase. (* stand for alphanumeric characters identifying each unit) For details on how to enter text, refer to "Entering text" (P15). You can set a password of up to 31 characters so that only registered users can use AirPlay. For details on how to enter text, refer to "Entering text" (P15). You can check the network connection. Press ENTER when "Start" is displayed. 0 Wait for a while if "Network" cannot be selected. It will appear when the network feature is started. 6. Bluetooth Bluetooth AutoChange Select whether or not to use the BLUETOOTH function. "On (default value)": Enables connection with a BLUETOOTH wireless technology enabled device by using the BLUETOOTH function. Select "On" also when making various BLUETOOTH settings. "Off": When the BLUETOOTH function is not to be used The input of the unit will automatically be switched to "BLUETOOTH" when connection is made from a BLUETOOTH wireless technology enabled device to the unit. "On (default value)": The input will automatically become "BLUETOOTH" when a BLUETOOTH wireless technology enabled device is connected. "Off": The function is disabled. 0 If the input is not switched automatically, set to "Off" and change the input manually. En 33