Onkyo TX-8250 User Manual English etc - Page 37
Updating via USB
View all Onkyo TX-8250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others are still unable to connect to the Internet, the DNS server or proxy server may be temporarily down. Check the service status with your ISP provider. 0 Others: Disconnect then reconnect the power cord, then repeat from the beginning. Updating via USB 0 Prepare a 128 MB or larger USB storage device. FAT16 or FAT32 file system format. - Media inserted in a USB card reader may not be used for this function. - USB storage devices with security function are not supported. - USB hubs and USB devices with hub function are not supported. Do not connect these devices to the unit. 0 Delete any data stored on the USB storage device. 0 Turn off the controller component (PC etc.) connected to the network. 0 Stop any playing Internet radio, USB storage device, or server content. 0 Some USB storage devices may take long to load, may not be loaded correctly, or may not be correctly fed depending on the device or their content. 0 We will not be liable whatsoever for any loss or damage of data, or storage failure arising from the use of the USB storage device with this unit. Thank you for your understanding. 1. Connect the USB storage device to your PC. 2. Download the firmware file from the our website to your PC and unzip. Firmware files are named in the following way: ONKRCV zip Unzip the file on your PC. The number of unzipped files and folders varies depending on the model. 3. Copy all unzipped files and folders to the root folder of the USB storage device. 0 Make sure to copy the unzipped files. 4. Connect the USB storage device to the USB port on the main unit. 0 If you connect a USB hard disk drive to the USB port of the unit, we recommend that you use its AC adapter to power it. 0 If the USB storage device has been partitioned, each section will be treated as an independent device. 5. Press SETUP on the remote controller. 6. Select "7. F/W Update" - "Update via USB" in order with the Up/Down buttons on the remote controller and press ENTER. Update via USB 0 You will not be able to select "Update via USB" if there is no firmware update. 7. Press ENTER with "Update" displayed to start the update. 0 During the update, do not turn off, or disconnect then reconnect the USB storage device. 0 "Completed!" is displayed when the update is complete. 8. Disconnect the USB storage device from the main unit. 9. Press Í ON/STANDBY on the main unit to switch the unit to standby. The process is completed and your firmware is updated to the latest version. 0 Do not use Í on the remote controller. If an Error Message is Displayed: When an error occurs, "¢-¢¢ Error!" is displayed on the display of the unit. ("¢" represents an alphanumeric character.) Check the following: 0 ¢-01, ¢-10: USB storage device not found. Check whether the USB storage device or USB cable is correctly inserted to the USB port of this unit. Connect the USB storage device to an external power source if it has its own power supply. 0 ¢-05, ¢-13, ¢-20, ¢-21: The firmware file is not present in the root folder of the USB storage device, or the firmware file is for another model. Retry from the download of the firmware file. 0 Others: Disconnect then reconnect the power cord, then repeat from the beginning. En 37