Onkyo TX-NR3008 Owner Manual - Page 68
Screen Centered Dialog, Re-EQ, Audio Selector, Re-EQTHX, HDMI OUT MAIN, HDMI IN, COAXIAL IN, CAL
View all Onkyo TX-NR3008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Screen Centered Dialog "Screen Ctr Dialog" is a function for moving the Center image of dialog etc. upwards through use of the front high speaker to fix the image to the display height. ■ Screen Ctr Dialog As the value increases, the Center image moves upwards. ` 0: Screen Centered Dialog off. ` 1 to 5: Screen Centered Dialog on. Note • The "Screen Ctr Dialog" can be used when supported listening mode is selected and "Center" and "Front High" are set to effective in "Speaker Configuration" (➔ 51). • This setting cannot be used while a pair of headphones is connected. Re-EQ With the Re-EQ function, you can compensate a soundtrack whose high-frequency content is too harsh, making it more suitable for home theater viewing. ■ Re-EQ ` Off: Re-EQ Function off. ` On: Re-EQ Function on. This function can be used with the following listening modes: Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Multichannel, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio, DTS Express, DSD, Dolby EX, Dolby Pro Logic IIz Height, Dolby PLIIx Movie, Neo:6 Cinema and 5.1-channel source + Neo:6, and Neural Surround. ■ Re-EQ(THX) ` Off: Re-EQ (THX) Function off. ` On: Re-EQ (THX) Function on. This function can be used with the following listening modes: THX Cinema, THX Surround EX, and THX Ultra2 Cinema. Note • Settings for the Re-EQ function are kept in each listening mode. However, in THX listening mode, when the AV receiver is turned off, it will return to "On". • This setting cannot be used while a pair of headphones is connected. Audio Selector You can set priorities of audio output when there are both digital and analog inputs. ■ Audio Selector ` ARC: The audio signal from your TV tuner can be sent to the HDMI OUT MAIN of the AV receiver.*1 With this selection the TV's audio can be automatically selected as a priority among other assignments. ` HDMI: This can be selected when HDMI IN has been assigned as an input source. If both HDMI (HDMI IN) and digital audio inputs (COAXIAL IN or OPTICAL IN) have been assigned, HDMI input is automatically selected as a priority. ` COAX: This can be selected when COAXIAL IN has been assigned as an input source. If both coaxial and HDMI inputs have been assigned, coaxial input is automatically selected as a priority. ` OPT: This can be selected when OPTICAL IN has been assigned as an input source. If both optical and HDMI inputs have been assigned, optical input is automatically selected as a priority. ` Multich: The AV receiver always outputs analog signals from multichannel analog input. ` Analog: The AV receiver always outputs analog signals. Note • The setting is stored individually for each input selector. • This setting can be made only for the input source that is assigned as HDMI IN, COAXIAL IN, or OPTICAL IN. • To select the digital audio input, see "Digital Audio Input" for more detail (➔ 50). • To select "Multich", you must assign the multichannel input(➔ 50). *1 You can select "ARC" if you select the TV/CD input selector. But you cannot select it if you've selected "Off" in the "Audio Return Channel" setting (➔ 65). En 68